Decide what kind of design you'd like to make first. You could draw your own logo, or cut letters out of old magazines to form words. Stephen made a Finger Tips cap in the studio. He cut out coloured letters from magazines and backed them with card to make them stiffer. If you like, you could coat the letters with some clear nail varnish to make them shiny. You need hook and look fastener now. If you're doing two lines of writing, make sure that it is double the width of the front of your baseball cap. Stick either the hook or loop side on. Now you need to stick your letters onto the remaining part of the hook and loop fastener. Cut it into little bits so they fit onto the back of the letters. This can be a bit tricky, so take extra care. When done, the letters should stick onto the cap. ...and you can swap them round however you like! Try it with pictures too!